Ceramic transfers, ceramic color sheets, black ceramic decals, decals enameling, silver ceramic decals, ceramic decals metallic gold, copper

Ceramic transfer color sheets, 4.13 x 5.91 inches
Suitable for glass, glass fusing and ceramics
Temperature 1400-1544 °F

With these ceramic transfer color sheets, you can cut, any form you like, and paste.
Beautiful and deep colors. Put layers on top of each other to create new colors.

Look under variations for more colors.

In stock:
10 sheets Black
14 sheets White
6 sheets metallic Gold
12 sheets metallic Silver
4 sheets metallic Copper


Put a transfer in clean lukewarm water, about 30 seconds.
Leave the wet transfer until it releases from the paper. Make sure your object is clean and dust free.
Slide the transfer on the object to be decorated and pull the paper from beneath it.
Always rub it, don't 'pluck' the transfer from the paper.
If the transfer is in the right place, any traces of water and / or air between the object should be removed to prevent "blow-outs" during the burning process.
Rub from the center to the edge. Now the transfer will not slip anymore. Then gently wipe the transfer with a damp, lint-free cloth to remove residues (gum). Allow to dry (a few hours). Porcelain 1472-1490 °F. Red max. 1454 °F.
Well one word of advice, make a few samples first.